XWKG-2D限位开关limit switch - 产品展示

限位开关是一个极其坚固的位置开关，适用于不能使用标准开关的重型翻转运动装置，其工作原理与防偏开关类似。它的动作臂上有一个滚轮，当外力作用于滚轮，使动作臂偏移，触动微动开关报警或保护性停机。借助于止动螺钉，开关动作角度2°～60°内双向独立可调。一旦情况恢复正常，重载弹簧驱使臂杆回到正常位置。微动开关为两对DPDT（双刀双掷）开关，触点容量10A/500Vac，特殊的表面处理适用于强腐蚀性环境。

适用范围：

位置指示器

重型运动设备位置探测

重型手动开关

技术规格：

壳体L*W*H(mm):191*135*109活动臂顶部距壳体底部距离160mm。

DPDT开关额定值：10A/500V

动作角度可调：2°～60°

两个导线开口：螺纹3/4″-14NPT

The limit switch is an extremely strong position switch, suitable for heavy duty flip motion device which can not use the standard switch, and its working principle is similar to the anti-bias switch. It has a roller on the action arm, when the external force acts on the roller, make the action arm offset, touch the fretting switch alarm or protective stop. With the aid of the stop screw, the switch action angle 2°~60° is independently adjustable in both directions. Once the condition returns to normal, the heavy load spring drives the arm rod back to normal position. The fretting switch is two pairs DPDT( double knife and double throw) switch, the contact capacity is 10 A/500Vac, Special surface treatment is suitable for strong corrosive environment. Scope of application: Position indicator Location Detection of Heavy Sports Equipment Heavy Manual Switch Technical specifications: Shell L*W*H (mm):160 from top of movable arm to bottom of shell 191*135*109 DPDT switch rating :10 A/500V Movement angle adjustable :2°~60° 2 wire openings :3/4"-14 NPT thread