ICS-14-4型电子皮带秤belt scale - 产品展示

ICS-14型称重桥架为四组称重托辊，全悬浮式结构，无耳轴支点和运动部件。采用矩形钢管设计，整个称重桥架具有足够高的刚性、较小的自重，外表积灰面积达到最低。
高精度电阻应变片式传感器安装于受拉部位，以减少非线形误差。保证整个系统的稳定性，其维护量极少。两只横梁上吊有四只拉式称重传感器对称重桥架提供支撑。称重桥架为单元组件结构，可方便迅速的进行现场安装，只需要八只螺栓安装固定。

称重传感器：

威泰克ICS-14，ICS-17，ICS-20系列电子皮带秤均采用拉式电子应变式称重传感器。
主要技术如下：
◆外壳：“S”型密封保护 ◆非线形：< 0.03%FS

◆非重复性:0.01%FS
◆蠕变< 0.02%FS ◆零点输出:±1%

◆在最大流量下,传感器弹性体施力点位移不大于0.2mm
◆湿度灵敏度:间隔:0.0008%FS/OF 零点:0.0015%FS/OF
◆滞后误差:0.02% ◆灵敏度误差:±0.01%

◆过载能力:传感器容量的150%

测速传感器：

采用60-12C型测速传感器

主要技术参数：

系统精度：±0.25% 称重范围：1~2500t/h

皮带宽度：500~2400mm 皮带速度：0~4m/s

皮带输送机倾角：<6°(特殊物料≤10°)

电源电压：220Vac（-15%~+10%）50Hz±2

环境温度：仪表-10℃--50℃，机械-35℃--65℃；

ICS-14- 4 electronic belt scale:

WEIGHTEC ICS- 14 high-precision electronic belt scale, with full suspension weighing bridge, digital signal transmission and processing technology, the dynamic cumulative error is far less than ±0.25%. Can reach ±0.125%, suitable for internal, external settlement or other high-precision symmetrical occasions.

System composition:

ICS- 14 electronic belt scale mainly consists of four parts: ICS- 14 weighing bridge (optional roller), S-type weighing sensor, 60-12C speed sensor and speed roller, imported MT2301 and MT2301D or WTC2001 integrator. Power: 220VAC, 50H power: 50W

weighing bridge: ICS- 14 weighing bridge for four groups of weighing rollers, full suspension structure, no ear shaft fulcrum and moving parts. Using rectangular steel pipe design, the whole weighing bridge has enough rigidity, small self-weight, and the surface area of ash deposit is the lowest. The high-precision resistance strain gauge sensor is installed in the drawing position to reduce the non-linear error. To ensure the stability of the whole system, its maintenance is very small. The two beams are supported by a symmetrical bridge with four pull-type weighing sensors. Weighing bridge is a unit component structure, it can be installed on site conveniently and quickly, and only eight bolts are required to be installed and fixed.

Weighing sensors:

WEIGHTEC ICS-14,ICS-17,ICS-20 series of electronic belt scales are drawn-type electronic strain gauge weighing sensors.

The main technologies are as follows:

housing: "S" seal protection, non-linear: < 0.03%FS, non-repeatability: 0.01%FS, creep < 0.02%FS, zero output: ±1% at maximum flow rate, Sensor elastomeric displacement is not greater than 0.2mm humidity sensitivity: interval: 0.0008%FS/OF zero: 0.0015%FS/OF, lag error: 0.02%, sensitivity error: ±0 .01%, overload capacity: 150%

speed sensor of sensor capacity: main technical parameters: system precision: ±0.25% weighing range: 1-2500t / h ,Belt width: 500~2400mm ,belt speed: 0~4m/s, belt conveyor angle: < 6 °(special material ≤ 10 °), power supply voltage: 220Vac (- 15% ~ 10%) ,50Hz ±2 ,ambient temperature: instrument-10 ℃-50 ℃, Mechanical-35 ℃-65 ℃;