ICS-20型电子皮带秤belt scale - 产品展示

ICS-20 型称重桥架在单杠杆上装有一组托辊，采用一只拉式传感器中间支撑，外侧支撑采用无磨擦耳轴支点，这种封闭装置可以防震、防潮、防腐及防止物料堆积，因而在恶劣的环境中不发生使用刀口装置和轴承装置带来的问题。称重桥架主梁采用矩形钢管，这使整个称重桥架具有足够的刚性、较小的自重、外表积灰面积达到最低。无运动和易损件。为了保证整个系统的稳定性，高精度电阻应变片式传感器安装于受拉部位，减少非线性误差。对于比重较轻物料的测量可采用配重秤架。

称重及测速传感器：

ICS-14,ICS-17,ICS-20系列电子皮带秤均采用拉式电子应变式称重传感器:

◆外壳：“S”型密封保护 ◆非线形：< 0.03%FS ◆非重复性:0.01%FS
◆蠕变< 0.02%FS ◆零点输出:±1%

◆在最大流量下,传感器弹性体施力点位移不大于0.2mm
◆湿度灵敏度:间隔:0.0008%FS/OF 零点:0.0015%FS/OF
◆滞后误差:0.02% ◆灵敏度误差:±0.01% ◆过载能力:传感器容量的150%

ICS-20系列电子皮带秤标准配置的测速传感器采用60-12C型测速传感器。

主要技术参数：

系统精度：±0.5% 称重范围：1~3500t/h

皮带宽度：500~2000mm 皮带速度：0~4m/s

皮带输送机倾角：≤18°

电源电压：220Vac（-15%~+10%）50Hz±2

环境温度：仪表-10℃--50℃，机械-35℃--65℃；

Weightec ICS-20 electronic belt scale, dynamic cumulative error ≤±0.5%, for the general factory belt conveyor weighing, as well as the crusher, coal mill, sieving machine and other equipment for accurate quantitative feed control, can also be used in industrial weighing process control, such as the detection of production, control of quantitative loading of products and detection of inventory and other occasions. System composition and weighing bridge: ICS-20 series belt scale is mainly composed of four parts: ICS-20 type lever weighing bridge (optional for idler), S type weighing sensor, speed measuring sensor, WTC3001 type integrator. Power :220 VAC,50HZ Power :50 W ICS-20 type weighing bridge is equipped with a set of rollers on a single lever, with a pull-type sensor intermediate support, and the outer support is supported by a non-wear ear shaft fulcrum. This kind of sealing device can prevent shock, moisture, anticorrosion and material accumulation, so the problems caused by the use of knife edge device and bearing device do not occur in bad environment. The main girder of weighing bridge adopts rectangular steel pipe, which makes the whole weighing bridge have enough rigidity, small weight, and the surface ash deposit area to the minimum. no movement and breakable parts. In order to ensure the stability of the whole system, the high precision resistive strain gauge sensor is installed in the tensile position to reduce the nonlinear error. The weight scale frame can be used for the measurement of light weight material. Weighing and measuring sensors: ICS-14,ICS-17,ICS-20 series of electronic belt weigher all use pull electronic strain weighing sensor: Shell:" S "type seal protection • Non-linear:<0.03% FS • Non-repeatability:0.01% FS Creep <0.02% FS Zero Output:±1% At the maximum flow rate, the displacement of the projectile force of the sensor is not greater than 0.2 mm Humidity sensitivity: interval:0.0008% FS/OF Zero:0.0015% FS/OF Delay error:0.02% sensitivity error:±0.01% overload capacity:150% of sensor capacity ICS-20 series electronic belt scale standard configuration of speed sensor using 60-12C speed sensor. Main technical parameters: System accuracy:±0.5% weighing range:1~3500t/h Belt width:500~200mm belt speed:0~4m/s Belt conveyor inclination:≤18° Supply voltage:220Vac (-15-10%)50Hz ±2 Ambient temperature: instrument -10°C --50°C, mechanical -35°C --65°C;